Welcome to my Home!

Thanks for stopping by! I'm so glad you're here and hope you take the time to look around. There's going to be a lot of before and afters, ideas, inspiration, tips, tutorials, and whatever else I come upon during my journey of home renovation and decoration. We'll see where it takes us!

Showing posts with label diy. Show all posts
Showing posts with label diy. Show all posts

Friday, October 21, 2011

Perfectly Imperfect Wreath {DIY Decorate}

It doesn't seem right that I could love this wreath as much as do... but there it is.  Something about the perfectly imperfect nature of this wreath just makes my heart happy.



 I love the color contrasting off the bright white of the frame... I love the frou frou nature of it's frills against the rough and weathered wood.



There's alot of these floating around bloggy land and I was dying to try one out for myself.


If you are so inclined to try one out for yourself... here's how I made mine~

Fire up the trusty glue gun (mine has seen better days!) and pick out some ribbon.

Gather up some foam pipe insulation, about two packages of coffee filters (you can get these in white or natural), and some gorilla tape or duct tape.

You can find the pipe insulation at Home Depot (or other hardware stores) in the plumbing section.  There were five pieces in a packag priced at $2.47.  That's less than .50 per wreath form! 

Hold the edges together while you wrap the tape around it.  It's tricky, but keep those edges together so that your form ends up being circular instead of oval.


Don't worry if it doesn't look perfect, you just want a general shape... it will all be covered up soon.


Now, grab your coffee filters.  You can either fold up a bunch and start gluing or you can fold-glue-fold-glue.  I personally needed the time in between each gluing to recover from glue burns.


So, you will fold it in half, then into quarters...

...then into eighths.  I also folded the tip down to give a better surface to glue on.  Apply glue to the tip.  I found it important to let the glue cool for a moment.  If it's too hot it will melt the foam.  I'm sure this could be remedied by using a low heat glue gun.
Lay the form flat and start gluing, layer by layer.  I found it to be helpful to stagger the layers (like bricks) as you add each layer.  

There you have it.  I wasn't very anal about it and I personally like the casual look I ended up with.  It makes me happy every time I look at it! 



Wednesday, September 28, 2011

Removing your Sink {DIY}

 Within 24 hours I will have a new countertop, for which, I can't tell you how excited I am!  So... to avoid paying the installers $800 we will remove the sink and old countertop ourselves.

 Here's the step by step if you ever find yourself in the position of pulling out your sink.
(I warn you... there are no pretty pictures here!)

First things first: gather your tools.  Pliers, a flat head and phillips screwdriver or driver attachments, garbage disposal key, utility knife, and small pry bar.  The garbage disposal key should be near your garbage disposal or wherever you might keep your important manuals.  Ours was in a drawer next to the sink.  It's a good idea to actually use some gorilla or duct tape and keep it affixed to the disposal.  

 Clear out the underneath of your sink cabinet as well as the top of your sink area.  No need to remove cabinet doors, mine are just off because we are in the process of painting them. Unplug or shut of the power to the garbage disposal.


Find your water shut off valves under the sink.  There should be a hot and a cold knob. Turn clockwise (righty tighty) to stop water flow to faucet.

Turn on faucet to verify that the water is really off.

Using your pliers disconnect the water supply line from the water pipe. 

Unscrew the plasic ring to disconnect the drain pipe from the garbage disposal.

Using a flat head screw driver loosen the screws holding the clamps for the connection to the dishwasher.  Remove this tube from the garbage disposal. {ewww!}

Using the garbage disposal key, place it into the horizontal hole and give a strong pull. Be sure to support the disposal with your other hand as will simply fall out of the support ring.  Set the disposal in the bottom of the cabinet until you are ready to reinstall.

Loosen the plastic ring to disconnect the drain tube from the "non-disposal" side of your sink.

Using a utility knife cut the silicone adhesive that is adhering the sink to the countertop.

Most sinks have clamps holding them tight to the countertop.  Locate these clamps, loosen the screws and remove the clamps.  My double sided sink had six clamps.

I was by myself while removing the sink so I found it helpful to lay inside the cabinet and push upwards on the bottom of the sink to pop it loose from the countertop.  You can also use a crow bar to help loosen from above. Once it popped loose I was able to (stand up) grab hold of the faucet and carefully lift the sink out of the hole.  Place the sink on an old towel until you are ready to reinstall (if that is what you plan to do).  Otherwise consider dropping it off at your local ReStore for someone else to use.  I also noticed that my sink had a recycle symbol on the bottom noting that it was safe to recycle.  Never would've thought of that.  

Here we go! Ready to remove the old countertop.  Tommorow night I'll be reinstalling the sink : )

Can't wait to see my kitchen transform.  The cabinets are coming along, new flooring in the future, and countertops tomorrow!

Ready to Reinstall?? Go here for the DIY!

Monday, September 19, 2011

No Sew Custom Pillow {DIY}

I just added a new wicker rocker to my front porch.  You can check out that transformation here.  I was lucky to have the custom made cushion that came with this antique piece.    My problem was the fabric was a no-go with the turquoise and I have ZERO sewing skills.  I mean, I'm not even sure I'd even know how to turn on a sewing machine!

So... when I stumbled across this post by Beth at Home Stories A2Z I knew there was hope!  She used drop cloth canvas, hemming tape, and fabric glue to create this and other adorable pillows.


She gives a great tutorial on using Scrapblog to create the adorable graphics as well!  

I actually had the supplies I needed stashed away in various places in the house.  I pulled out the drop cloth canvas I got for FREE (yes!) at a garage sale, my Heat n Bond, and my iron.  Instead of using fabric glue, which I didn't have, I improvised and used my glue gun.  Here's what I came up with~


I figured there had to be way to use this technique on a custom shaped pillow.  This particular pillow had all sorts of curves.  Here's a tutorial for those of you that are curious how I did it~
Start with your supplies~

Scissors
Drop Cloth Canvas
Heat-n-Bond (hemming tape, stitch witchery, or the like)
Iron
Glue Gun (not shown)
Acrylic Paints
Sponge Brush
Painters Tape
Pillow that you would like to cover

Trace your pillow onto your drop cloth.  Be sure to trace it onto the side that will be flipped to the inside when you are done (not like I did!).  I'm sure you can use some sort of sewing marker that dissapears... but I didn't have anything like that.  Do this to two pieces of canvas.  



Add two inches to your custom shape.



Cut out your shapes.


Cut your Heat n Bond 

I cut mine in fairly thick strips because I was concerned about it holding up on a thick fabric like the dropcloth.  I followed the curved lines of the cushion.  Leave one side open so that you can slide in your pillow.




Follow the directions on your Heat n Bond package to adhere the two pieces together.  Flip your pillow inside out creating a pocket for your cushion.
  Slide your cushion in.

Sorry, I don't have any pictures of this next step.  What you will do is turn the edges in towards the inside of your pillow leaving a clean seam on the outside.  Run a line of hot glue just a couple of inches long and press this seam together.  Hold for a minute or so until the glue sets.  Be sure to just work with a small section at a time.  Work your way across the open seam until you have secured the pillow inside.  That's it!

The blank canvas wasn't doing much for me so I added some stripping to it using some acrylic paints I had on hand.  


Just measure... (my center line was 1" wide, and each blue stripe was 1/8" wide)

tape...

and paint.






I'm pretty happy with how it turned out.  I'm sure it could've been better if done with a sewing machine, but for those of us who can't sew~ this works out just fine!
Todays Creative Blog

Tip Junkie handmade projects

Monday, September 12, 2011

Turquoise Rocker {DIY}

Lucky for me the MIL is is downsizing... sweet!  I have been the lucky recipient of two couches, an entertainment hutch, a rocker, and a coffee table, to name a few.  And that's just in the last couple of months.  Good for me she has great taste! Here's the latest giveaway (almost throw away) off my mother in law's front porch.  Supposedly she bought this years ago from an antique shop.  Looks like it's had better days!

This is where we started out-  layers and layers of paint, a torn woven seat, and a variety of injuries endured through the years.  So we ripped out the seat, knowing there was no way we could fix it.  We had to come up with a new plan for that seat.


There's nothin' that Gorilla Glue can't fix (what?! you broke your gorilla?!).  Love this stuff, I've used a few times now and have been really happy with the durability and how easy it is to work with.

We grabbed some wire brushes and went to work.  Even the kids loved helping with this job.  It was hard to get to a point where the paint would stop chipping off, but we tried to get as much off as possible to get a good base for the new paint.


We had to get creative to make a new seat~

I used some scrap bead board I had laying around from the kitchen project and cut a new seat (thanks sweetie!).  A little adhesive called Power Grab and the handy dandy nail gun and she was all set!

  I got busy with a good solid coat of spray primer.  And then came the fun stuff!

Whhhheeeee! Mediterranean Blue by Valspar.  I personally haven't used Valspar before now and I'm kinda in love! I was completely suckered in by their gorgeous color choices.  I only had to go to four, count them, FOUR, stores to find this color! Sheesh.  I have love, love, loved the way this went on!  Here she is... all ready for the front porch!




Ahhh... so in love!  The color on the right is more true to life, but I wanted to show you the new seat all painted.  And you see that cushion?  I recovered the original cushion that came with the chair.  Didn't think I knew how to sew?  Guess what?  I don't!  See how I covered the custom cushion without sewing a stitch here!

Project Materials:
Wire brushes ($2.98/set of three)
Gorilla Glue- already owned
 2 cans Spray Primer- already owned ($2.98 retail)
1 1/2 cans Valspar Spray Paint in Mediterranean ($3.78 ea. at Lowe's)
 Approximate total:  $17

Not bad! I'm pretty thrilled with the results!
Pin It
DIY Club
Related Posts Plugin for WordPress, Blogger...